SEMICONDUCTOR ELECTRONICS MANUFACTURING SERVICES

Precision repair. Reliable refurbishment. Proven electronics execution.

We deliver cleanroom-based electronics manufacturing services for semiconductor and high-technology companies — from motherboard and PCBA diagnostics to BGA rework, module repair, testing, refurbishment and cable-harness services.

Our Own Cleanroom Dedicated environment for sensitive assemblies
Mandatory ESD Clearance Personnel screening before repair-area entry
IPC-Aligned Workmanship Applicable requirements for assembly and rework
Documented Verification Inspection, test and disposition records
Our Dedicated Facility

Our own cleanroom, equipped for precision electronics work

Our dedicated cleanroom supports electronics diagnostics, rework, test and refurbishment. Before entering designated laboratory and repair areas, technicians and engineers must obtain clearance through the ESD checker and wear the prescribed PPE and ESD footwear. Controlled workstations, precision tools and suitable test equipment support product protection throughout execution.

Mandatory ESD shoes and required PPE
ESD checker clearance at entry
ESD workstations and mats
Wrist straps and grounding provisions
Oscilloscopes and measurement scopes
Metcal soldering and rework systems
Microscopes and inspection tools
Electrical and functional testers
Precision hand tools and fixtures
Organized component and material handling
Electronics cleanroom technician inspecting an electronic assembly
Quality Discipline Begins at Entry

Controlled access, ESD protection and IPC-aligned workmanship

We apply defined entry, handling, workmanship and verification controls to protect sensitive assemblies and support repeatable repair outcomes. Applicable customer specifications and approved work instructions govern each assignment.

01

ESD Clearance Before Entry

Technicians and engineers must pass the designated ESD checker before accessing laboratory and repair areas. Personnel follow the prescribed grounding and entry-control procedures.

02

Required PPE and ESD Footwear

Personnel wear required PPE kits and ESD shoes in controlled areas. Additional protective items are selected according to the task, facility rules and customer requirements.

03

Applicable IPC Standards

We follow applicable IPC workmanship and inspection requirements for soldering, electronics assembly, board rework and cable-related work, as relevant to the approved scope and customer acceptance criteria.

04

Protected Work Environment

ESD-equipped benches, mats, grounding provisions and appropriate material-handling methods help reduce exposure to electrostatic discharge and handling damage.

05

Inspection and Verification

Work is checked against approved procedures using suitable visual, electrical and functional inspection methods. Results and exceptions are recorded as specified by the program.

06

Process Accountability

Work instructions, revision awareness, material identification, repair records and non-conformance escalation provide a consistent basis for operational review.

Standards application: IPC requirements are applied where relevant to the work package and customer-approved acceptance criteria. Specific IPC standard editions, personnel certifications and facility accreditations should be stated only when verified.
Core EMS Capabilities

Electronics manufacturing services for semiconductor operations

Our focus is the physical product and its supporting assemblies. We undertake repair, rework, testing, upgrade and refurbishment work on electronic boards, modules and interconnect assemblies in line with customer specifications, approved work instructions and acceptance criteria.

Precision PCBA rework
Precision PCBA Rework
Inspection and functional testing
Inspection & Functional Testing
Electronics diagnostics and fault isolation
Diagnostics & Fault Isolation
▦

Motherboard & PCBA Repair

Board-level and component-level repair of complex electronic assemblies, including motherboards, channel cards, control boards and interface cards.

  • Fault isolation and component diagnosis
  • Power, signal and connectivity fault investigation
  • Connector, socket, pad and track repair where feasible
  • Component replacement and solder-joint rework

Workmanship and inspection follow applicable IPC criteria alongside the customer-approved repair procedure.

⌁

Testing & Validation

Electrical and functional test execution to assess product condition, verify repairs and confirm operation against agreed test requirements.

  • Functional and system-level testing
  • Electrical measurement and signal checks
  • Module and subsystem validation
  • Test result capture and reporting
⌕

Debugging & Failure Analysis

Structured troubleshooting to reproduce reported failures, isolate fault locations and support effective corrective action.

  • Visual and electrical diagnostics
  • Intermittent fault investigation
  • Root-cause analysis support
  • Re-test and repair verification
✣

BGA & Precision Rework

Controlled rework of high-density packages and fine-pitch components using appropriate equipment, process controls and inspection.

  • BGA removal and replacement
  • Reballing and component replacement
  • Fine-pitch soldering and micro-rework
  • Post-rework inspection and validation
↻

Hardware Upgrade & Modification

Implementation of approved hardware changes and module upgrades to support product revisions, sustaining needs and continued serviceability.

  • Component and hardware upgrades
  • Board and module modification
  • Engineering change implementation
  • Verification to released instructions
⚙

Electronic Module Repair

Repair and verification of selected electronic and electro-mechanical modules used in semiconductor and computing systems.

  • Module inspection and fault assessment
  • Pick-head and Z-axis module repair
  • Assembly-level repair and replacement
  • Functional checks and repair history
Detailed Repair & Rework Scope

From incoming failure to verified return

Each repair program is configured to the product, available diagnostics, customer procedures and agreed acceptance criteria. Typical work may include:

Close-up of electronics rework at a controlled workbench

Board and card-level services

Motherboards Channel cards PCBA Control cards Power boards Interface modules
  • Incoming inspection and failure symptom recording
  • Visual inspection under magnification
  • Component-level fault isolation and diagnosis
  • SMT and through-hole solder rework
  • BGA package rework and replacement
  • Connector, socket and damaged interconnect repair
  • Cleaning, inspection and post-repair verification

Applicable IPC rework and acceptance requirements are considered for approved soldering and BGA-related activities.

Test, debug and validation support

  • Use of oscilloscopes, electrical measurement instruments and suitable testers
  • Functional test execution against customer-defined procedures
  • Signal, continuity and electrical checks as applicable
  • Debug support for board, card and module-level issues
  • Re-test after repair, rework or upgrade
  • Documentation of test outcomes, defects and disposition
  • Escalation of failures requiring customer engineering disposition
01 / RECEIVE

Intake & traceability

Identify the unit, record its condition and capture reported failure details.

02 / INSPECT

Visual assessment

Inspect board, components, connectors and workmanship under suitable magnification.

03 / DIAGNOSE

Test & debug

Reproduce faults and isolate the affected circuit, component or assembly.

04 / REPAIR

Rework & restore

Perform approved repair, BGA work, component change or hardware upgrade.

05 / VERIFY

Validate & release

Complete agreed tests, record results and prepare the assembly for return.

Specialized Refurbishment Programs

Refurbishment of thermal and interconnect assemblies

We manage defined refurbishment workflows at our facility, including technical execution, approved consumables, supplier coordination, traceability and return logistics.

Specialist electronics refurbishment
Specialist Refurbishment
Controlled handling and inspection
Controlled Handling & Inspection
Verification before release
Verification Before Release
◉

Cold Plate Refurbishment

Refurbishment of cold plates used in computing and electronic platforms, based on customer specifications and approved work instructions.

  • Receipt, identification and condition assessment
  • Disassembly and cleaning as specified
  • Replacement of thermal interface materials (TIM)
  • Replacement of foam, tapes and related consumables
  • Reassembly, inspection and applicable testing
  • Packaging, traceability and return shipment
⌁

Cable Harness Repair & Upgrade

Repair, refurbishment and upgrade of multiple cable harness models and related interconnect assemblies.

  • Inspection and harness identification
  • Cable, connector and termination replacement
  • Procurement of approved cables and connectors
  • Continuity and connection checks
  • Labelling, workmanship inspection and verification
  • Configuration and material traceability

Terminations and finished harnesses are checked against applicable IPC workmanship requirements and the approved drawing or specification.

▣

Module & Assembly Refurbishment

Refurbishment and repair of selected modules and assemblies to restore serviceability and extend useful operating life.

  • Incoming inspection and repair assessment
  • Approved component or subassembly replacement
  • Mechanical and electrical checks
  • Functional verification and release records

Materials, procurement and logistics coordination

We can manage supplier quotations, sourcing of approved consumables and components, purchase-order follow-up, material availability, inventory records, inbound/outbound shipment coordination and import/export documentation and customs-clearance support as defined in the project scope.

Additional Manufacturing Support

Supporting the wider electronics production lifecycle

In addition to repair and refurbishment, we can undertake defined manufacturing-support activities that complement the customer's production, quality and service operations.

Incoming Inspection & Screening

Visual inspection, identification, segregation, defect screening and recording of incoming assemblies and materials.

Quality Control & Workmanship Inspection

Inspection against approved visual standards, workmanship criteria, checklists and customer procedures.

Test Operations

Execution of prescribed test steps, collection of test data and escalation of units that do not meet acceptance criteria.

Receiving, Material Handling & Kitting

Receiving, identification, controlled storage, staging, kitting and movement of parts, materials and electronic assemblies.

Packaging & Shipment Preparation

Packaging, labelling, shipment documentation and coordination for repaired or refurbished products.

Engineering Sustaining Support

Support for approved product changes, sustaining activities, obsolescence-related replacements and process updates.

Facility, Process & Quality Controls

Quality controls that remain visible through delivery

Beyond laboratory entry requirements, each agreed work package is managed through technical instructions, traceability, inspection records and escalation of deviations.

Approved Technical Instructions

Scope-specific work instructions and applicable customer drawings define the authorized activity and release criteria.

Material and Unit Traceability

Unit identity, approved replacement parts and relevant process information are captured as required by the program.

Inspection Evidence

Visual, electrical or functional checks are documented at the agreed checkpoints before disposition.

Equipment Suitability

Testers, instruments and repair tools are selected for the approved activity and its verification needs.

Change and Revision Awareness

Technical updates are assessed against the active instructions before changes are introduced to the work package.

Exception and Non-Conformance Handling

Unexpected defects, failed tests and process deviations are segregated or escalated for authorized disposition.

Engagement Approach

Flexible EMS delivery models

We align the delivery model to the product, process ownership, facility requirements and commercial scope agreed with each customer.

Dedicated Offsite EMS

Repair, rework, testing and refurbishment activities performed at our own equipped facility against defined scope, acceptance criteria and turnaround expectations.

Onsite Manufacturing Support

Execution of agreed repair, test, inspection or production-support processes at the customer facility, using customer or approved equipment and procedures.

End-to-End Program Execution

Defined work packages managed through receipt, processing, inspection, testing, reporting and return shipment, with agreed operational and quality metrics.

Frequently Asked Questions

Working with our EMS facility

What types of electronic assemblies can you support?

We can assess motherboards, channel cards, PCBAs, control cards, electronic modules, cable harnesses and selected thermal-management assemblies. Final acceptance depends on technical review, available test methods and agreed scope.

Can repair and refurbishment be performed at your facility?

Yes. Our own cleanroom facility is equipped with ESD workstations, precision soldering and rework equipment, microscopes, oscilloscopes and testers to support the services described on this page.

Can you work to customer-specific procedures?

Yes. Work scope, instructions, revision control, inspection points, test procedures and acceptance criteria are agreed with the customer before program execution.

Can you support cross-border return logistics?

Import/export documentation, customs-clearance coordination and shipment arrangements can be included where required and agreed for the project.

How do you manage IPC requirements and ESD-safe entry?

Applicable IPC workmanship requirements are used with the customer-approved work package. Personnel entering designated laboratory and repair areas must obtain ESD checker clearance and wear required PPE, including ESD shoes.

Looking for an electronics manufacturing partner?

Share your board, module, refurbishment or testing requirement. We can review the technical scope, facility needs, acceptance criteria and delivery model with your team.

Enquire About EMS Services

Let’s Strategize

Book a Free Consultation